next up previous [pdf]

Next: Gulf of Mexico stack Up: COMMON-MIDPOINT STACKING Previous: Crossing traveltime curves

Ideal weighting functions for stacking

The difference between stacking as defined by nmo0() [*] and by nmo1() [*] is in the weighting function $(\tau/t)(1/\sqrt{t})$. This weight made a big difference in the resolution of the stacks but I cannot explain whether this weighting function is the best possible one, or what systematic procedure leads to the best weighting function in general. To understand this better, notice that $(\tau/t)(1/\sqrt{t})$ can be factored into two weights, $\tau$ and $t^{-3/2}$. One weight could be applied before NMO and the other after. That would also be more efficient than weighting inside NMO, as does nmo1(). Additionally, it is likely that these weighting functions should take into account data truncation at the cable's end. Stacking is the most important operator in seismology. Perhaps some objective measure of quality can be defined and arbitrary powers of $t$, $x$, and $\tau$ can be adjusted until the optimum stack is defined. Likewise, we should consider weighting functions in the spectral domain. As the weights $\tau$ and $t^{-3/2}$ tend to cancel one another, perhaps we should filter with opposing filters before and after NMO and stack.


next up previous [pdf]

Next: Gulf of Mexico stack Up: COMMON-MIDPOINT STACKING Previous: Crossing traveltime curves

2009-03-16