up [pdf]
##############################################################
#### Interferometry/Imaging/Block_Scatterer
#### Block Scatterer Model for validation
#### of acoustic scattering reciprocity.
#### Author: Ivan Vasconcelos
##############################################################


from rsf.proj import *
import fdmod,gfield,rules

par = {
    'nx':501,  'ox':0, 'dx':0.004,  'lx':'x', 'ux':'km',
    'nz':501,   'oz':0, 'dz':0.002,  'lz':'z', 'uz':'km',
    'nt':2501,  'ot':0, 'dt':0.0004, 'lt':'t', 'ut':'s',
    'kt':250,
    'jsnap':200,
    'nb':200,
    'frq':30,
    'ssou':'y',
    }

fdmod.param(par)

par['kf']=0.624/par['dz'] + 1 # = 0.624
par['kg']=1.0/par['dz'] + 1 # = 0.824
par['kz']=0.770/par['dz'] + 1  # = 0.598
par['kh']=0.448/par['dz'] + 1 # = 0.448
par['oxf']=0.5/par['dx'] + 1 # = 0.500

#par['kf']=1.25/2.*par['nz']
#par['kg']=1.65/2.*par['nz']
#par['kz']=0.60*par['nz']
#par['kh']=0.90/2.*par['nz']
#par['oxf']=0.5*par['nx']

par['oxda']=0.742/par['dx'] + 1
par['kxda']=0.752/par['dx'] + 1
par['ozda']=0.492/par['dz'] + 1
par['kzda']=0.504/par['dz'] + 1
#par['oxda']=122 0.242/par['dx'] + 1
#par['kxda']=127
#par['ozda']=247
#par['kzda']=252


par['oxdb']=0.990/par['dx'] + 1
par['kxdb']=1.010/par['dx'] + 1
par['ozdb']=0.490/par['dz'] + 1
par['kzdb']=0.510/par['dz'] + 1
#par['oxdb']=373
#par['kxdb']=377
#par['ozdb']=247
#par['kzdb']=252

par['oxdc']=0.990/par['dx'] + 1
par['kxdc']=1.010/par['dx'] + 1
par['ozdc']=0.490/par['dz'] + 1
par['kzdc']=0.510/par['dz'] + 1
#par['oxdc']=249
#par['kxdc']=253
#par['ozdc']=177
#par['kzdc']=182

#par['frq']=45
par['ssou']='n'
par['vscale']=0
par['hscale']=1

# ------------------------------------------------------------
# P velocity (km/s)
Flow('vpb',None,
     '''
     spike nsp=6 mag=0.25,0.6,0.35,2,2,2 p2=-0.15,0.25,0.0,0.0,0.0,0.0
     n1=%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d o1=%(oz)g,%(oz)d,%(oz)d,%(oz)d,%(oz)d,%(oz)d 
     d1=%(dz)g,%(dz)d,%(dz)d,%(nz)d,%(nz)d,%(nz)d k1=%(kz)d,%(kf)d,%(kh)d,%(ozda)d,%(ozdb)d,%(ozdc)d 
     l1=%(kg)d,%(nz)d,%(kf)d,%(kzda)d,%(kzdb)d,%(kzdc)d
     n2=%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d o2=%(ox)g,%(ox)d,%(ox)d,%(ox)d,%(ox)d,%(ox)d 
     d2=%(dx)g,%(dx)d,%(dx)d,%(dx)d,%(dx)d,%(dx)d k2=%(ox)d,%(ox)d,%(ox)d,%(oxda)d,%(oxdb)d,%(oxdc)d 
     l2=%(nx)d,%(nx)d,%(nx)d,%(kxda)d,%(kxdb)d,%(kxdc)d |
     add add=3.0 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)

#
Flow('vpbo',None,
     '''
     spike nsp=6 mag=0,0,0,0,-0.5,0 p2=-0.15,0.25,0.0,0.0,0.0,0.0
     n1=%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d o1=%(oz)g,%(oz)d,%(oz)d,%(oz)d,%(oz)d,%(oz)d 
     d1=%(dz)g,%(dz)d,%(dz)d,%(nz)d,%(nz)d,%(nz)d k1=%(kz)d,%(kf)d,%(kh)d,%(ozda)d,%(ozdb)d,%(ozdc)d 
     l1=%(kg)d,%(nz)d,%(kf)d,%(kzda)d,%(kzdb)d,%(kzdc)d
     n2=%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d o2=%(ox)g,%(ox)d,%(ox)d,%(ox)d,%(ox)d,%(ox)d 
     d2=%(dx)g,%(dx)d,%(dx)d,%(dx)d,%(dx)d,%(dx)d k2=%(ox)d,%(ox)d,%(ox)d,%(oxda)d,%(oxdb)d,%(oxdc)d 
     l2=%(nx)d,%(nx)d,%(nx)d,%(kxda)d,%(kxdb)d,%(kxdc)d |
     add add=1.8 | smooth rect1=5 rect2=5 | 
     put label1=z label2=x unit1=km unit2=km
     ''' % par)

# S velocity (km/s)
Flow('vsb',None,
     '''
     spike nsp=6 mag=1.0,1.0,1.0,2.5,2.5,2.5 p2=-0.15,0.25,0.0,0.0,0.0,0.0
     n1=%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d o1=%(oz)g,%(oz)d,%(oz)d,%(oz)d,%(oz)d,%(oz)d 
     d1=%(dz)g,%(dz)d,%(dz)d,%(nz)d,%(nz)d,%(nz)d k1=%(kz)d,%(kf)d,%(kh)d,%(ozda)d,%(ozdb)d,%(ozdc)d 
     l1=%(kg)d,%(nz)d,%(kf)d,%(kzda)d,%(kzdb)d,%(kzdc)d
     n2=%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d o2=%(ox)g,%(ox)d,%(ox)d,%(ox)d,%(ox)d,%(ox)d 
     d2=%(dx)g,%(dx)d,%(dx)d,%(dx)d,%(dx)d,%(dx)d k2=%(ox)d,%(ox)d,%(ox)d,%(oxda)d,%(oxdb)d,%(oxdc)d 
     l2=%(nx)d,%(nx)d,%(nx)d,%(kxda)d,%(kxdb)d,%(kxdc)d |
     add add=0.00001 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)
#
Flow('vsbo',None,
     '''
     spike nsp=6 mag=0,0,0,0,0,0 p2=-0.15,0.25,0.0,0.0,0.0,0.0
     n1=%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d o1=%(oz)g,%(oz)d,%(oz)d,%(oz)d,%(oz)d,%(oz)d 
     d1=%(dz)g,%(dz)d,%(dz)d,%(nz)d,%(nz)d,%(nz)d k1=%(kz)d,%(kf)d,%(kh)d,%(ozda)d,%(ozdb)d,%(ozdc)d 
     l1=%(kg)d,%(nz)d,%(kf)d,%(kzda)d,%(kzdb)d,%(kzdc)d
     n2=%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d o2=%(ox)g,%(ox)d,%(ox)d,%(ox)d,%(ox)d,%(ox)d 
     d2=%(dx)g,%(dx)d,%(dx)d,%(dx)d,%(dx)d,%(dx)d k2=%(ox)d,%(ox)d,%(ox)d,%(oxda)d,%(oxdb)d,%(oxdc)d 
     l2=%(nx)d,%(nx)d,%(nx)d,%(kxda)d,%(kxdb)d,%(kxdc)d |
     add add=0.00001 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)

# Density (kg/km^3)
Flow('rob',None,
     '''
     spike nsp=6 mag=500000,500000,500000,1000000,1000000,1000000 p2=-0.15,0.25,0.0,0.0,0.0,0.0
     n1=%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d o1=%(oz)g,%(oz)d,%(oz)d,%(oz)d,%(oz)d,%(oz)d 
     d1=%(dz)g,%(dz)d,%(dz)d,%(nz)d,%(nz)d,%(nz)d k1=%(kz)d,%(kf)d,%(kh)d,%(ozda)d,%(ozdb)d,%(ozdc)d 
     l1=%(kg)d,%(nz)d,%(kf)d,%(kzda)d,%(kzdb)d,%(kzdc)d
     n2=%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d o2=%(ox)g,%(ox)d,%(ox)d,%(ox)d,%(ox)d,%(ox)d 
     d2=%(dx)g,%(dx)d,%(dx)d,%(dx)d,%(dx)d,%(dx)d k2=%(ox)d,%(ox)d,%(ox)d,%(oxda)d,%(oxdb)d,%(oxdc)d 
     l2=%(nx)d,%(nx)d,%(nx)d,%(kxda)d,%(kxdb)d,%(kxdc)d |
     add add=2000000 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)

#
Flow('robo',None,
     '''
     spike nsp=6 mag=0,0,0,0,0,0 p2=-0.15,0.25,0.0,0.0,0.0,0.0
     n1=%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d,%(nz)d o1=%(oz)g,%(oz)d,%(oz)d,%(oz)d,%(oz)d,%(oz)d 
     d1=%(dz)g,%(dz)d,%(dz)d,%(nz)d,%(nz)d,%(nz)d k1=%(kz)d,%(kf)d,%(kh)d,%(ozda)d,%(ozdb)d,%(ozdc)d 
     l1=%(kg)d,%(nz)d,%(kf)d,%(kzda)d,%(kzdb)d,%(kzdc)d
     n2=%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d,%(nx)d o2=%(ox)g,%(ox)d,%(ox)d,%(ox)d,%(ox)d,%(ox)d 
     d2=%(dx)g,%(dx)d,%(dx)d,%(dx)d,%(dx)d,%(dx)d k2=%(ox)d,%(ox)d,%(ox)d,%(oxda)d,%(oxdb)d,%(oxdc)d 
     l2=%(nx)d,%(nx)d,%(nx)d,%(kxda)d,%(kxdb)d,%(kxdc)d |
     add add=2000000 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)

# Epsilon
Flow('epsilon',None,
     '''
     spike nsp=1 mag=0
     n1=%(nz)d o1=%(oz)g d1=%(dz)g
     n2=%(nx)d o2=%(ox)g d2=%(dx)g k1=%(kz)d l1=%(nz)d |
     add add=0 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)

# Delta
Flow('delta',None,
     '''
     spike nsp=1 mag=0
     n1=%(nz)d o1=%(oz)g d1=%(dz)g
     n2=%(nx)d o2=%(ox)g d2=%(dx)g k1=%(kz)d l1=%(nz)d |
     add add=0 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)

# ------------------------------------------------------------
# random field



# background velocities
Flow('kk_scat',None,
     '''
     spike nsp=1 mag=-0.5
     n1=%(nz)d o1=%(oz)g d1=%(dz)g
     n2=%(nx)d o2=%(ox)g d2=%(dx)g k1=%(ozdc)d l1=%(kzdc)d k2=%(oxdc)d l2=%(kxdc)d |
     add add=0.0 | smooth rect1=5 rect2=5 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)

#
Flow('vpo',None,
     '''
     spike nsp=1 mag=0
     n1=%(nz)d o1=%(oz)g d1=%(dz)g
     n2=%(nx)d o2=%(ox)g d2=%(dx)g k1=%(kz)d l1=%(nz)d |
     add add=1.8 | 
     put label1=z label2=x unit1=km unit2=km
     ''' % par)

Flow('vso',None,
     '''
     spike nsp=1 mag=0
     n1=%(nz)d o1=%(oz)g d1=%(dz)g
     n2=%(nx)d o2=%(ox)g d2=%(dx)g k1=%(kz)d l1=%(nz)d |
     add add=0.00001 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)
#
Flow('roo',None,
     '''
     spike nsp=1 mag=0
     n1=%(nz)d o1=%(oz)g d1=%(dz)g
     n2=%(nx)d o2=%(ox)g d2=%(dx)g k1=%(kz)d l1=%(nz)d |
     add add=2000000 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)
#
Flow('epso',None,
     '''
     spike nsp=1 mag=0
     n1=%(nz)d o1=%(oz)g d1=%(dz)g
     n2=%(nx)d o2=%(ox)g d2=%(dx)g k1=%(kz)d l1=%(nz)d |
     add add=0.0 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)
#
Flow('delo',None,
     '''
     spike nsp=1 mag=0
     n1=%(nz)d o1=%(oz)g d1=%(dz)g
     n2=%(nx)d o2=%(ox)g d2=%(dx)g k1=%(kz)d l1=%(nz)d |
     add add=0.0 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)

# mask
par['kzs']=0.45*par['nz'] + 1
par['lzs']=0.75/par['dx'] + 1
par['kxs']=0.7/par['dx'] + 1
par['lxs']=1.3/par['dx'] + 1
Flow('mask',None,
     '''
     spike nsp=1 mag=1
     n1=%(nz)d o1=%(oz)g d1=%(dz)g k1=%(kzs)d l1=%(lzs)d 
     n2=%(nx)d o2=%(ox)g d2=%(dx)g k2=%(kxs)d l2=%(lxs)d |
     smooth rect1=30 rect2=30 repeat=3 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)


Result('mask',fdmod.cgrey('title="mask" wantscalebar=y',par))

par['ff']=9.8
par['aa']=1.0   #6.3 # distribution shape parameter 'alpha'

par['ru']=0.036
par['rv']=0.009

gfield.execute('hh',112009,par)
Result('hh',fdmod.cgrey('wantscalebar=y color=j',par))
Flow('gg','hh mask','add mode=p ${SOURCES[1]}')
Result('gg',fdmod.cgrey('wantscalebar=y color=j',par))
Flow('kk','gg','add scale=0.75 | add add=1')
Result('kk',fdmod.cgrey('wantscalebar=y bias=1.0 color=j',par))

#--------------------------------------------------------------
# Final velocity and density fields
Flow('vp','vpbo kk','add mode=p ${SOURCES[1]}')
Flow('vs','vsbo','cat')
Flow('ro','rob kk','add mode=p ${SOURCES[1]}')
Flow('vph','vpo kk_scat','add mode=a ${SOURCES[1]}')
Flow('vsh','vso','cat')
Flow('roh','roo','cat')


# source/receiver positions
#fdmod.point3('ss',
#            par['ox']+(par['nx']/2*par['dx']),
#            par['oz'],1,par)
#fdmod.horizontal('rrt',par['dz'],par)
#fdmod.horizontal('rrb',par['oz']+(par['nz']*par['dx']),par)
#fdmod.vertical('rrl',par['dx'],par)
#fdmod.vertical('rrr',par['ox']+(par['nx']*par['dx']),par)
#Flow('rr','rrt rrr rrb rrl','cat ${SOURCES[1]} ${SOURCES[2]} ${SOURCES[3]}')
#fdmod.boxarray('rr',par['nz'],par['oz'],par['dz'],par['nx'],par['ox'],par['dx'],par)

# first receiver point
par['sx'] = 0.6
par['sz'] = 0.2
fdmod.point3('ss',
            par['sx'],
            par['sz'],1,par)

# second receiver point
par['sx2'] = 1.2
par['sz2'] = 0.25
fdmod.point3('ss2',
            par['sx2'],
            par['sz2'],1,par)

# 
par['rz1']=0.10
fdmod.horizontal('rr1',par['rz1'],par)

par['rz2']=0.30
fdmod.horizontal('rr2',par['rz2'],par)
par['rz3']=0.45
fdmod.horizontal('rr3',par['rz3'],par)
par['rz4']=0.60
fdmod.horizontal('rr4',par['rz4'],par)
par['rz5']=0.75
fdmod.horizontal('rr5',par['rz5'],par)
par['rz6']=0.90
fdmod.horizontal('rr6',par['rz6'],par)

Flow('rr','rr1 rr2 rr3 rr4 rr5 rr6','cat axis=2 space=n ${SOURCES[1]} ${SOURCES[2]} ${SOURCES[3]} ${SOURCES[4]} ${SOURCES[5]}')

# ------------------------------------------------------------
# source/receiver coordinates
Plot('rr1','window n1=2 | dd type=complex | window j2=10 | '
     + fdmod.cgraph('wantscalebar=y symbol=x plotcol=1',par))
Plot('rr2','window n1=2 | dd type=complex | window j2=10 | '
     + fdmod.cgraph('wantscalebar=y symbol=x plotcol=1',par))
Plot('rr3','window n1=2 | dd type=complex | window j2=10 | '
     + fdmod.cgraph('wantscalebar=y symbol=x plotcol=1',par))
Plot('rr4','window n1=2 | dd type=complex | window j2=10 | '
     + fdmod.cgraph('wantscalebar=y symbol=x plotcol=1',par))
Plot('rr5','window n1=2 | dd type=complex | window j2=10 | '
     + fdmod.cgraph('wantscalebar=y symbol=x plotcol=1',par))
Plot('rr6','window n1=2 | dd type=complex | window j2=10 | '
     + fdmod.cgraph('wantscalebar=y symbol=x plotcol=1',par))
Plot('rr','window n1=2 | dd type=complex | window j2=10 | '
     + fdmod.cgraph('wantscalebar=y symbol=x plotcol=1',par))
Plot('ss','window n1=2 | dd type=complex | window | '
     + fdmod.cgraph('wantscalebar=y symbol=o plotcol=1',par))
Plot('ss2','window n1=2 | dd type=complex | window | '
     + fdmod.cgraph('wantscalebar=y symbol=o plotcol=1',par))

# ------------------------------------------------------------
# dipole source
fdmod.wavelet('hor0',par['frq'],par)
fdmod.wavelet('ver0',par['frq'],par)

# Make wavelet for vertical dipole

Flow('hor','hor0','add scale=0')
Flow('ver','ver0','add scale=1')

Flow('wave0','ver hor','cat axis=2 space=n ${SOURCES[1:2]}')
Flow('wave','wave0',
     '''
     transp plane=12 |
     transp plane=23 |
     transp plane=12
     ''')

Plot('ver','wave','window n2=1 f2=0 | window n1=500 |' + fdmod.waveplot('title="Elastic vertical source"',par))
Plot('hor','wave','window n2=1 f2=1 | window n1=500 |' + fdmod.waveplot('title="Elastic horizontal source"',par))
Result('wave','hor ver','Movie')

# Make wavelet for horizontal dipole

Flow('horh','hor0','add scale=1')
Flow('verh','ver0','add scale=0')

Flow('wave0h','verh horh','cat axis=2 space=n ${SOURCES[1:2]}')
Flow('waveh','wave0h',
     '''
     transp plane=12 |
     transp plane=23 |
     transp plane=12
     ''')

Plot('verh','waveh','window n2=1 f2=0 | window n1=500 |' + fdmod.waveplot('title="Elastic vertical source"',par))
Plot('horh','waveh','window n2=1 f2=1 | window n1=500 |' + fdmod.waveplot('title="Elastic horizontal source"',par))
Result('waveh','horh verh','Movie')

# ------------------------------------------------------------
Plot('vp',     fdmod.cgrey('wantscalebar=y allpos=y color=j bias=2.0    pclip=99.9 title="vp"',par))
Plot('vs',     fdmod.cgrey('wantscalebar=y allpos=y color=j bias=0.0    pclip=96 title="vs"',par))
Plot('vph',     fdmod.cgrey('wantscalebar=y allpos=y color=J bias=1.3    pclip=99.9 title="vph"',par))
Plot('vsh',     fdmod.cgrey('wantscalebar=y allpos=y color=j bias=0.0    pclip=100 title="vsh"',par))
Plot('roh',     fdmod.cgrey('wantscalebar=y allpos=y color=j bias=2000000   pclip=100 title="roh"',par))
Plot('ro',     fdmod.cgrey('wantscalebar=y allpos=y color=j bias=1500000 pclip=100 title="density"',par))
Plot('epsilon',fdmod.cgrey('wantscalebar=y allpos=y             pclip=100',par))
Plot('delta',  fdmod.cgrey('wantscalebar=y allpos=y             pclip=100',par))

Result('vp',     ['vp',     'ss','rr'],'Overlay')
Result('vs',     ['vs',     'ss','rr'],'Overlay')
Result('vph',     ['vph',     'ss','rr'],'Overlay')
Result('vsh',     ['vsh',     'ss','rr'],'Overlay')
Result('roh',     ['roh',     'ss','rr'],'Overlay')
Result('ro',     ['ro',     'ss','rr'],'Overlay')
Result('epsilon',['epsilon','ss','rr'],'Overlay')
Result('delta',  ['delta',  'ss','rr'],'Overlay')

fdmod.anisotropic('cc','vph','vsh','roo','epso','delo',par)
fdmod.anisotropic('cchomo','vpo','vso','roo','epso','delo',par)

#--------------------------------------------------------------------------------------------
# vector-acoustic modeling - MAKING DATA
#--------------------------------------------------------------------------------------------

##
# particle velocity field without free surface, 
par['ssou']='y'
rules.emodel('de','we','wave','cc','roo','ss','rr','ssou=%(ssou)s opot=n' % par,par)

Flow('def','de',
     '''put n1=%(nx)d d1=%(dx)g o1=%(ox)d n2=6 d2=1 o2=0 n3=2 d3=1 o3=0 n4=%(nt)d d4=%(dt)g o4=%(ot)d out=stdout
     ''' % par )

for i in range(2):
    Flow('we'+str(i+1),'we',
         '''
         window n3=1 f3=%d |
         window min1=%g max1=%g min2=%g max2=%g |
         scale axis=123
         ''' % (i,par['zmin'],par['zmax'],par['xmin'],par['xmax']))

    Plot('we'+str(i+1),
         fdmod.wgrey('title=u%s pclip=99' % str(i+1),par),view=1)
    Plot('def'+str(i+1),'def',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)

Flow(  'weall','we1 we2','cat axis=1 space=n ${SOURCES[1]}')
Plot('weall',
     '''
     grey title="Vector components" wantaxis=y screenratio=%f screenht=8
     gainpanel=a pclip=99
     grid1=y grid2=y g1num=0.25 g2num=0.25
     ''' % (2*par['ratio']),view=1)

Flow('wall','we1 we2','cat axis=1 space=n ${SOURCES[1]}')
Plot('wall',
     '''
     grey title="" wantaxis=y screenratio=%f screenht=10
     gainpanel=a pclip=99
     grid1=y grid2=y g1num=0.1 g2num=0.1
     ''' % (3*par['ratio']),view=1)

#
#
# vertical point-force with free surface, no scattering in the subsurface. Used to compute "THE ANSWER".
rules.emodel('deo','weo','wave','cchomo','roo','ss','rr','ssou=%(ssou)s opot=n' % par,par)

Flow('deof','deo',
     '''put n1=%(nx)d d1=%(dx)g o1=%(ox)d n2=6 d2=1 o2=0 n3=2 d3=1 o3=0 n4=%(nt)d d4=%(dt)g o4=%(ot)d out=stdout
     ''' % par )

# get scattered waves
Flow('desf','def deof','add ${SOURCES[1]} scale=1,-1  out=stdout')
Flow('wes','we weo','add ${SOURCES[1]} scale=1,-1')

for i in range(2):
    Flow('weo'+str(i+1),'weo',
         '''
         window n3=1 f3=%d |
         window min1=%g max1=%g min2=%g max2=%g |
         scale axis=123
         ''' % (i,par['zmin'],par['zmax'],par['xmin'],par['xmax']))

    Plot('weo'+str(i+1),
         fdmod.wgrey('title=u%s pclip=99' % str(i+1),par),view=1)
    Plot('deof'+str(i+1),'deof',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)
    Plot('desf'+str(i+1),'desf',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)

##
# pressure fields
par['ssou']='y'
rules.emodel('dep','wep','wave','cc','roo','ss','rr','ssou=%(ssou)s opot=y' % par,par)

Flow('depf','dep',
     '''put n1=%(nx)d d1=%(dx)g o1=%(ox)d n2=6 d2=1 o2=0 n3=2 d3=1 o3=0 n4=%(nt)d d4=%(dt)g o4=%(ot)d out=stdout
     ''' % par )

for i in range(2):
    Flow('wep'+str(i+1),'wep',
         '''
         window n3=1 f3=%d |
         window min1=%g max1=%g min2=%g max2=%g |
         scale axis=123
         ''' % (i,par['zmin'],par['zmax'],par['xmin'],par['xmax']))

    Plot('wep'+str(i+1),
         fdmod.wgrey('title=u%s pclip=99' % str(i+1),par),view=1)
    Plot('depf'+str(i+1),'depf',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)

Flow(  'wepall','wep1 wep2','cat axis=1 space=n ${SOURCES[1]}')
Plot('wepall',
     '''
     grey title="Vector components" wantaxis=y screenratio=%f screenht=8
     gainpanel=a pclip=99
     grid1=y grid2=y g1num=0.25 g2num=0.25
     ''' % (2*par['ratio']),view=1)

Flow('wpall','wep1 wep2','cat axis=1 space=n ${SOURCES[1]}')
Plot('wpall',
     '''
     grey title="" wantaxis=y screenratio=%f screenht=10
     gainpanel=a pclip=99
     grid1=y grid2=y g1num=0.1 g2num=0.1
     ''' % (3*par['ratio']),view=1)

#
#
# vertical point-force with free surface, no scattering in the subsurface. Used to compute "THE ANSWER".
rules.emodel('depo','wepo','wave','cchomo','roo','ss','rr','ssou=%(ssou)s opot=y' % par,par)

Flow('depof','depo',
     '''put n1=%(nx)d d1=%(dx)g o1=%(ox)d n2=6 d2=1 o2=0 n3=2 d3=1 o3=0 n4=%(nt)d d4=%(dt)g o4=%(ot)d out=stdout
     ''' % par )

# get scattered waves
Flow('depsf','depf depof','add ${SOURCES[1]} scale=1,-1  out=stdout')
Flow('weps','wep wepo','add ${SOURCES[1]} scale=1,-1')

for i in range(2):
    Flow('wepo'+str(i+1),'wepo',
         '''
         window n3=1 f3=%d |
         window min1=%g max1=%g min2=%g max2=%g |
         scale axis=123
         ''' % (i,par['zmin'],par['zmax'],par['xmin'],par['xmax']))

    Plot('wepo'+str(i+1),
         fdmod.wgrey('title=u%s pclip=99' % str(i+1),par),view=1)
    Plot('depof'+str(i+1),'depof',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)
    Plot('depsf'+str(i+1),'depsf',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)


## SECOND RECEIVER
# particle velocity field without free surface, 
par['ssou']='y'
rules.emodel('der','wer','wave','cc','roo','ss2','rr','ssou=%(ssou)s opot=n' % par,par)

Flow('derf','der',
     '''put n1=%(nx)d d1=%(dx)g o1=%(ox)d n2=6 d2=1 o2=0 n3=2 d3=1 o3=0 n4=%(nt)d d4=%(dt)g o4=%(ot)d out=stdout
     ''' % par )

for i in range(2):
    Flow('wer'+str(i+1),'wer',
         '''
         window n3=1 f3=%d |
         window min1=%g max1=%g min2=%g max2=%g |
         scale axis=123
         ''' % (i,par['zmin'],par['zmax'],par['xmin'],par['xmax']))

    Plot('wer'+str(i+1),
         fdmod.wgrey('title=u%s pclip=99' % str(i+1),par),view=1)
    Plot('derf'+str(i+1),'derf',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)

Flow('werall','wer1 wer2','cat axis=1 space=n ${SOURCES[1]}')
Plot('werall',
     '''
     grey title="Vector components" wantaxis=y screenratio=%f screenht=8
     gainpanel=a pclip=99
     grid1=y grid2=y g1num=0.25 g2num=0.25
     ''' % (2*par['ratio']),view=1)

Flow('wrall','wer1 wer2','cat axis=1 space=n ${SOURCES[1]}')
Plot('wrall',
     '''
     grey title="" wantaxis=y screenratio=%f screenht=10
     gainpanel=a pclip=99
     grid1=y grid2=y g1num=0.1 g2num=0.1
     ''' % (3*par['ratio']),view=1)

#
#
# vertical point-force with free surface, no scattering in the subsurface. Used to compute "THE ANSWER".
rules.emodel('deor','weor','wave','cchomo','roo','ss2','rr','ssou=%(ssou)s opot=n' % par,par)

Flow('deorf','deor',
     '''put n1=%(nx)d d1=%(dx)g o1=%(ox)d n2=6 d2=1 o2=0 n3=2 d3=1 o3=0 n4=%(nt)d d4=%(dt)g o4=%(ot)d out=stdout
     ''' % par )

# get scattered waves
Flow('desrf','derf deorf','add ${SOURCES[1]} scale=1,-1  out=stdout')
Flow('wesr','wer weor','add ${SOURCES[1]} scale=1,-1')

for i in range(2):
    Flow('weor'+str(i+1),'weor',
         '''
         window n3=1 f3=%d |
         window min1=%g max1=%g min2=%g max2=%g |
         scale axis=123
         ''' % (i,par['zmin'],par['zmax'],par['xmin'],par['xmax']))

    Plot('weor'+str(i+1),
         fdmod.wgrey('title=u%s pclip=99' % str(i+1),par),view=1)
    Plot('deorf'+str(i+1),'deorf',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)
    Plot('desrf'+str(i+1),'desrf',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)

##
# pressure fields
par['ssou']='y'
rules.emodel('depr','wepr','wave','cc','roo','ss2','rr','ssou=%(ssou)s opot=y' % par,par)

Flow('deprf','depr',
     '''put n1=%(nx)d d1=%(dx)g o1=%(ox)d n2=6 d2=1 o2=0 n3=2 d3=1 o3=0 n4=%(nt)d d4=%(dt)g o4=%(ot)d out=stdout
     ''' % par )

for i in range(2):
    Flow('wepr'+str(i+1),'wepr',
         '''
         window n3=1 f3=%d |
         window min1=%g max1=%g min2=%g max2=%g |
         scale axis=123
         ''' % (i,par['zmin'],par['zmax'],par['xmin'],par['xmax']))

    Plot('wepr'+str(i+1),
         fdmod.wgrey('title=u%s pclip=99' % str(i+1),par),view=1)
    Plot('deprf'+str(i+1),'deprf',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)

Flow('weprall','wepr1 wepr2','cat axis=1 space=n ${SOURCES[1]}')
Plot('weprall',
     '''
     grey title="Vector components" wantaxis=y screenratio=%f screenht=8
     gainpanel=a pclip=99
     grid1=y grid2=y g1num=0.25 g2num=0.25
     ''' % (2*par['ratio']),view=1)

Flow('wprall','wepr1 wepr2','cat axis=1 space=n ${SOURCES[1]}')
Plot('wprall',
     '''
     grey title="" wantaxis=y screenratio=%f screenht=10
     gainpanel=a pclip=99
     grid1=y grid2=y g1num=0.1 g2num=0.1
     ''' % (3*par['ratio']),view=1)

#
#
# vertical point-force with free surface, no scattering in the subsurface. Used to compute "THE ANSWER".
rules.emodel('depor','wepor','wave','cchomo','roo','ss2','rr','ssou=%(ssou)s opot=y' % par,par)

Flow('deporf','depor',
     '''put n1=%(nx)d d1=%(dx)g o1=%(ox)d n2=6 d2=1 o2=0 n3=2 d3=1 o3=0 n4=%(nt)d d4=%(dt)g o4=%(ot)d out=stdout
     ''' % par )

# get scattered waves
Flow('depsrf','deprf deporf','add ${SOURCES[1]} scale=1,-1 out=stdout')
Flow('wepsr','wepr wepor','add ${SOURCES[1]} scale=1,-1')

for i in range(2):
    Flow('wepor'+str(i+1),'wepor',
         '''
         window n3=1 f3=%d |
         window min1=%g max1=%g min2=%g max2=%g |
         scale axis=123
         ''' % (i,par['zmin'],par['zmax'],par['xmin'],par['xmax']))

    Plot('wepor'+str(i+1),
         fdmod.wgrey('title=u%s pclip=99' % str(i+1),par),view=1)
    Plot('deporf'+str(i+1),'deporf',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)
    Plot('depsrf'+str(i+1),'depsrf',
         '''
         window n3=1 f3=%d squeeze=n |
         transp plane=34 | transp plane=23 | transp plane=12 |
         window f1=%d | put o1=%g | pad end1=%d |
         ''' % (i,par['kt'],par['ot'],par['kt'])
         + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par),view=1)

##
## TRUE RESPONSE
# pressure fields
par['ssou']='y'
rules.emodel('dept','wept','wave','cc','roo','ss2','ss','ssou=%(ssou)s opot=y' % par,par)

Flow('deptf','dept',
     '''cat  out=stdout
     ''')

for i in range(2):
    Flow('wept'+str(i+1),'wept',
         '''
         window n3=1 f3=%d |
         window min1=%g max1=%g min2=%g max2=%g |
         scale axis=123
         ''' % (i,par['zmin'],par['zmax'],par['xmin'],par['xmax']))

    Plot('wept'+str(i+1),
         fdmod.wgrey('title=u%s pclip=99' % str(i+1),par),view=1)
#    Result('deptf'+str(i+1),'deptf',
#           '''
#           window n3=1 f3=%d squeeze=n |
#           transp plane=34 | transp plane=23 | transp plane=12 |
#           window f1=%d | put o1=%g | pad end1=%d |
#           ''' % (i,par['kt'],par['ot'],par['kt'])
#           + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par))

Flow('weptall','wept1 wept2','cat axis=1 space=n ${SOURCES[1]}')
Plot('weptall',
     '''
     grey title="Vector components" wantaxis=y screenratio=%f screenht=8
     gainpanel=a pclip=99
     grid1=y grid2=y g1num=0.25 g2num=0.25
     ''' % (2*par['ratio']),view=1)

Flow('wptall','wept1 wept2','cat axis=1 space=n ${SOURCES[1]}')
Plot('wptall',
     '''
     grey title="" wantaxis=y screenratio=%f screenht=10
     gainpanel=a pclip=99
     grid1=y grid2=y g1num=0.1 g2num=0.1
     ''' % (3*par['ratio']),view=1)

#
#
# vertical point-force with free surface, no scattering in the subsurface. Used to compute "THE ANSWER".
rules.emodel('depot','wepot','wave','cchomo','roo','ss2','ss','ssou=%(ssou)s opot=y' % par,par)

Flow('depotf','depot',
     '''cat  out=stdout
     ''')

# get scattered waves
Flow('depstf','deptf depotf','add ${SOURCES[1]} scale=1,-1 out=stdout')
Flow('wepst','wept wepot','add ${SOURCES[1]} scale=1,-1')

for i in range(2):
    Flow('wepot'+str(i+1),'wepot',
         '''
         window n3=1 f3=%d |
         window min1=%g max1=%g min2=%g max2=%g |
         scale axis=123
         ''' % (i,par['zmin'],par['zmax'],par['xmin'],par['xmax']))

    Plot('wepot'+str(i+1),
         fdmod.wgrey('title=u%s pclip=99' % str(i+1),par),view=1)
#    Result('depotf'+str(i+1),'depotf',
#           '''
#           window n3=1 f3=%d squeeze=n |
#           transp plane=34 | transp plane=23 | transp plane=12 |
#           window f1=%d | put o1=%g | pad end1=%d |
#           ''' % (i,par['kt'],par['ot'],par['kt'])
#           + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par))
#    Result('depstf'+str(i+1),'depstf',
#           '''
#           window n3=1 f3=%d squeeze=n |
#           transp plane=34 | transp plane=23 | transp plane=12 |
#           window f1=%d | put o1=%g | pad end1=%d |
#           ''' % (i,par['kt'],par['ot'],par['kt'])
#           + fdmod.dgrey('title=u%s pclip=99 grid=y' %str(i+1),par))
#
Result('depstf',
       ''' window min2=0 max2=0 min3=0 max3=1.0  squeeze=n |
                   transp plane=13 | window min1=0.098 max1=1.0 | pad end1=250 | put o1=0 |
                   wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="True" 
                   labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
       ''' % (par['lt'],par['ut']))
Plot('depstf',
       ''' window min2=0 max2=0 min3=0 max3=1.0  squeeze=n |
                   transp plane=13 | window min1=0.098 max1=1.0 | pad end1=250 | put o1=0 |
                   wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="True" 
                   labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
       ''' % (par['lt'],par['ut']))

#
Result('deptf',
       ''' window min2=0 max2=0 min3=0 max3=1.0  squeeze=n |
                   transp plane=13 | window min1=0.098 max1=1.0 | pad end1=250 | put o1=0 |
                   wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="True" 
                   labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
       ''' % (par['lt'],par['ut']))
Plot('deptf',
       ''' window min2=0 max2=0 min3=0 max3=1.0  squeeze=n |
                   transp plane=13 | window min1=0.098 max1=1.0 | pad end1=250 | put o1=0 |
                   wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="True" 
                   labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
       ''' % (par['lt'],par['ut']))

#
Result('depotf',
       ''' window min2=0 max2=0 min3=0 max3=1.0  squeeze=n |
                   transp plane=13 | window min1=0.098 max1=1.0 | pad end1=250 | put o1=0 |
                   wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="True" 
                   labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
       ''' % (par['lt'],par['ut']))
Plot('depotf',
       ''' window min2=0 max2=0 min3=0 max3=1.0  squeeze=n |
                   transp plane=13 | window min1=0.098 max1=1.0 | pad end1=250 | put o1=0 |
                   wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="True" 
                   labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
       ''' % (par['lt'],par['ut']))



#####################################################################
#### Interferometry 
#####################################################################

## Make frequency-domain data

for i in range(6):

        Flow('def_w_'+str(i+1),'def','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))

        Flow('depf_w_'+str(i+1),'depf','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint | 
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))

        Flow('derf_w_'+str(i+1),'derf','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 |  sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))

        Flow('deprf_w_'+str(i+1),'deprf','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))

        Flow('depsrf_w_'+str(i+1),'depsrf','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))

        Flow('deporf_w_'+str(i+1),'deporf','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))

        Flow('desrf_w_'+str(i+1),'desrf','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))


        Flow('deorf_w_'+str(i+1),'deorf','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))

        Flow('depsf_w_'+str(i+1),'depsf','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))


        Flow('depof_w_'+str(i+1),'depof','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))


        Flow('desf_w_'+str(i+1),'desf','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))

        Flow('deof_w_'+str(i+1),'deof','''
        window min2=%d max2=%d min3=0 max3=0 squeeze=n | 
        transp plane=41 | sfcausint |
        pad beg1=2501 |
        fft1 inv=n opt=y sym=n |
        transp plane=42 
        ''' % (i,i))


## Compute frequency-domain integrands


## Analysis of TOP integral for FULL-FIELDS

# Term: p_S(r_A) v_0^{*}(r_B)
Flow('full_pAS_vB0_top',['deprf_w_1','def_w_1'],''' math y=${SOURCES[0]} x=${SOURCES[1]} output='y*(conj(x))' ''')

Flow('full_pAS_vB0_topt','full_pAS_vB0_top',''' fft1 inv=y opt=y sym=y ''')

# Term: v_S(r_A) p_0^{*}(r_B)
Flow('full_vAS_pB0_top',['derf_w_1','depf_w_1'],''' math y=${SOURCES[0]} x=${SOURCES[1]} output='y*(conj(x))' ''')

Flow('full_vAS_pB0_topt','full_vAS_pB0_top',''' fft1 inv=y opt=y sym=n ''')
#
Result('vph_top',     ['vph','ss','ss2','rr1'],'Overlay')
Plot('vph_top',     ['vph','ss','ss2','rr1'],'Overlay')

Result('full_pAS_vB0_topt',
       '''grey title="top: p V*" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))
Plot('full_pAS_vB0_topt',
       '''window j1=5 | grey title="top: p V*" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))

Result('full_vAS_pB0_topt',
       ''' grey title="top: V p*" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))
Plot('full_vAS_pB0_topt',
       '''window j1=5 | grey title="top: V p*" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))

Result('full_terms_top','vph_top full_pAS_vB0_topt full_vAS_pB0_topt','SideBySideAniso')


# total top integrand and integration:

Flow('full_Integrand_top','full_pAS_vB0_topt full_vAS_pB0_topt','add ${SOURCES[1]} scale=1,1')

Result('full_Integrand_top',
       ''' grey title="top: total integrand" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))
Plot('full_Integrand_top',
       ''' grey title="top: total integrand" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))

# taper
par['ktxs']=0.15/par['dx'] + 1
par['ltxs']=1.85/par['dx'] + 1
Flow('taper',None,
     '''
     spike nsp=1 mag=1
     n1=5002 o1=-1.0004 d1=%(dt)g k1=1 l1=5002 
     n2=%(nx)d o2=%(ox)g d2=%(dx)g k2=%(ktxs)d l2=%(ltxs)d |
     smooth rect1=30 rect2=30 repeat=3 |
     put label1=z label2=x unit1=km unit2=km
     ''' % par)


Result('taper',fdmod.cgrey('title="taper" wantscalebar=y',par))

Flow('full_Int_taper_top','full_Integrand_top taper','add ${SOURCES[1]} mode=p scale=1,-1')

Result('full_Int_taper_top',
       ''' grey title="top: total integrand (w/ taper)" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))
Plot('full_Int_taper_top',
       ''' grey title="top: total integrand (w/ taper)" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))

# compute top contribution

Flow('full_Contribution_top','full_Int_taper_top','stack axis=2')

Result('full_Contribution_top',
       ''' window min1=0 max1=1.0 | 
                   wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Top" 
                   labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
       ''' % (par['lt'],par['ut']))
Plot('full_Contribution_top',
       ''' window min1=0 max1=1.0 | 
                   wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Top" 
                   labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
       ''' % (par['lt'],par['ut']))

Result('full_Cont_top','vph_top full_Int_taper_top full_Contribution_top','SideBySideAniso')

## Analysis of TOP integral for SCATTERING

# Term: p_S(r_A) v_0^{*}(r_B)
Flow('pAS_vB0_top',['depsrf_w_1','deof_w_1'],''' math y=${SOURCES[0]} x=${SOURCES[1]} output='y*(conj(x))' ''')

Flow('pAS_vB0_topt','pAS_vB0_top',''' fft1 inv=y opt=y sym=y ''')

# Term: v_S(r_A) p_0^{*}(r_B)
Flow('vAS_pB0_top',['desrf_w_1','depof_w_1'],''' math y=${SOURCES[0]} x=${SOURCES[1]} output='y*(conj(x))' ''')

Flow('vAS_pB0_topt','vAS_pB0_top',''' fft1 inv=y opt=y sym=n ''')
#
#Result('vph_top',     ['vph','ss','ss2','rr1'],'Overlay')
#Plot('vph_top',     ['vph','ss','ss2','rr1'],'Overlay')

Result('pAS_vB0_topt',
       ''' grey title="top: p_S V_0*" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))
Plot('pAS_vB0_topt',
       '''window j1=5 | grey title="top: p_S V_0*" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))

Result('vAS_pB0_topt',
       ''' grey title="top: v_S p_0*" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))
Plot('vAS_pB0_topt',
       '''window j1=5 | grey title="top: v_S p_0*" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))

Result('terms_top','vph_top pAS_vB0_topt vAS_pB0_topt','SideBySideAniso')


# total top integrand and integration:

Flow('Integrand_top','pAS_vB0_topt vAS_pB0_topt','add ${SOURCES[1]} scale=1,1')

Result('Integrand_top',
       ''' grey title="top: total integrand" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))
Plot('Integrand_top',
       ''' grey title="top: total integrand" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))

# taper
Flow('Int_taper_top','Integrand_top taper','add ${SOURCES[1]} mode=p scale=1,1')

Result('Int_taper_top',
       ''' grey title="top: total integrand (w/ taper)" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))
Plot('Int_taper_top',
       ''' grey title="top: total integrand (w/ taper)" pclip=99 grid=y 
                   labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
       ''' % (par['lt'],par['ut'],par['lx'],par['ux']))

# compute top contribution

Flow('Contribution_top','Int_taper_top','stack axis=2 | causint')

Result('Contribution_top',
       ''' window min1=0 max1=1.0 | 
                   wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Top" 
                   labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
       ''' % (par['lt'],par['ut']))
Plot('Contribution_top',
       ''' window min1=0 max1=1.0 | 
                   wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Top" 
                   labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
       ''' % (par['lt'],par['ut']))

Result('Cont_top','vph_top Int_taper_top Contribution_top','SideBySideAniso')

### Analysis of bottom integral contributions

Flow('rrb','rr2 rr3 rr4 rr5 rr6','cat axis=2 space=n ${SOURCES[1]} ${SOURCES[2]} ${SOURCES[3]} ${SOURCES[4]}')
Plot('rrb','window n1=2 | dd type=complex | window j2=10 | '
     + fdmod.cgraph('wantscalebar=y symbol=x plotcol=1',par))

Result('vph_bottom',     ['vph','ss','ss2','rrb'],'Overlay')
Plot('vph_bottom',     ['vph','ss','ss2','rrb'],'Overlay')

## SCATTERING terms...
for i in range(5):

        # model and surface
        Result('vph_bot_'+str(i+2),     ['vph','ss','ss2','rr'+str(i+2)],'Overlay')
        Plot('vph_bot_'+str(i+2),     ['vph','ss','ss2','rr'+str(i+2)],'Overlay')

        # Term: p_S(r_A) v_0^{*}(r_B)
        Flow('pAS_vB0_bot_'+str(i+2),['depsrf_w_'+str(i+2),'deof_w_'+str(i+2)],''' math x=${SOURCES[1]} output='input*(conj(x))' ''')

        Flow('pAS_vB0_bott_'+str(i+2),'pAS_vB0_bot_'+str(i+2),''' fft1 inv=y opt=y sym=y ''')

        # Term: v_S(r_A) p_0^{*}(r_B)
        Flow('vAS_pB0_bot_'+str(i+2),['desrf_w_'+str(i+2),'depof_w_'+str(i+2)],''' math x=${SOURCES[1]} output='input*(conj(x))' ''')

        Flow('vAS_pB0_bott_'+str(i+2),'vAS_pB0_bot_'+str(i+2),''' fft1 inv=y opt=y sym=n ''')

        # Plot terms
        Result('pAS_vB0_bott_'+str(i+2),
               '''grey title="bottom #%d: p_S V_0*" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))
        Plot('pAS_vB0_bott_'+str(i+2),
                   '''window j1=5 |  grey title="bottom #%d: p_S V_0*" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
                   ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))

        Result('vAS_pB0_bott_'+str(i+2),
               ''' grey title="bottom #%d: v_S p_0*" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))
        Plot('vAS_pB0_bott_'+str(i+2),
               '''window j1=5 |  grey title="bottom #%d: v_S p_0*" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))

        Result('terms_bot_'+str(i+2),['vph_bot_'+str(i+2),'pAS_vB0_bott_'+str(i+2),'vAS_pB0_bott_'+str(i+2)],'SideBySideAniso')

        # sum terms
        Flow('Integrand_bot_'+str(i+2),['pAS_vB0_bott_'+str(i+2),'vAS_pB0_bott_'+str(i+2)],'add ${SOURCES[1]} mode=a scale=1,-1')

        Result('Integrand_bot_'+str(i+2),
               ''' grey title="bottom #%d: total integrand" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))
        Plot('Integrand_bot_'+str(i+2),
               ''' grey title="bottom #%d: total integrand" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))

        # taper integrand
        Flow('Int_taper_bot_'+str(i+2),['Integrand_bot_'+str(i+2),'taper'],'add ${SOURCES[1]} mode=p scale=1,-1')

        Result('Int_taper_bot_'+str(i+2),
               ''' grey title="bottom #%d: total integrand (w/ taper)" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))
        Plot('Int_taper_bot_'+str(i+2),
               ''' grey title="bottom #%d: total integrand (w/ taper)" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))

        # get final contribution
        Flow('Contribution_bot_'+str(i+2),'Int_taper_bot_'+str(i+2),'stack axis=2')

        Result('Contribution_bot_'+str(i+2),
               ''' window min1=0 max1=1.0 | 
                           wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Bottom #%d" 
                           labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
               ''' % (i+2,par['lt'],par['ut']))
        Plot('Contribution_bot_'+str(i+2),
               ''' window min1=0 max1=1.0 | 
                           wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Bottom #%d" 
                           labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
               ''' % (i+2,par['lt'],par['ut']))

        Flow('Contribution_top_bot_'+str(i+2),['Contribution_top','Contribution_bot_'+str(i+2)],'cat ${SOURCES[1]} axis=2')

        Result('Contribution_top_bot_'+str(i+2),
               ''' window min1=0 max1=1.0 | 
                           wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Bottom #%d" 
                           labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
               ''' % (i+2,par['lt'],par['ut']))
        Plot('Contribution_top_bot_'+str(i+2),
               ''' window min1=0 max1=1.0 | 
                           wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Bottom #%d" 
                           labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
               ''' % (i+2,par['lt'],par['ut']))

        Result('Cont_bot_'+str(i+2),['vph_bot_'+str(i+2),'Int_taper_bot_'+str(i+2),'Contribution_top_bot_'+str(i+2)],'SideBySideAniso')

#
## FULL-FIELD terms...
for i in range(5):

        # Term: p(r_A) v^{*}(r_B)
        Flow('full_pAS_vB0_bot_'+str(i+2),['deprf_w_'+str(i+2),'def_w_'+str(i+2)],''' math x=${SOURCES[1]} output='input*(conj(x))' ''')

        Flow('full_pAS_vB0_bott_'+str(i+2),'full_pAS_vB0_bot_'+str(i+2),''' fft1 inv=y opt=y sym=y ''')

        # Term: v_S(r_A) p_0^{*}(r_B)
        Flow('full_vAS_pB0_bot_'+str(i+2),['derf_w_'+str(i+2),'depf_w_'+str(i+2)],''' math x=${SOURCES[1]} output='input*(conj(x))' ''')

        Flow('full_vAS_pB0_bott_'+str(i+2),'full_vAS_pB0_bot_'+str(i+2),''' fft1 inv=y opt=y sym=n ''')

        # Plot terms
        Result('full_pAS_vB0_bott_'+str(i+2),
               ''' grey title="bottom #%d: p V*" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))
        Plot('full_pAS_vB0_bott_'+str(i+2),
                   '''window j1=5 | grey title="bottom #%d: p V*" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
                   ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))

        Result('full_vAS_pB0_bott_'+str(i+2),
               ''' grey title="bottom #%d: V p*" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))
        Plot('full_vAS_pB0_bott_'+str(i+2),
               '''window j1=5 | grey title="bottom #%d: V p*" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))

        Result('full_terms_bot_'+str(i+2),['vph_bot_'+str(i+2),'full_pAS_vB0_bott_'+str(i+2),'full_vAS_pB0_bott_'+str(i+2)],'SideBySideAniso')

        # sum terms
        Flow('full_Integrand_bot_'+str(i+2),['full_pAS_vB0_bott_'+str(i+2),'full_vAS_pB0_bott_'+str(i+2)],'add ${SOURCES[1]} mode=a scale=1,1')

        Result('full_Integrand_bot_'+str(i+2),
               ''' grey title="bottom #%d: total integrand" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))
        Plot('full_Integrand_bot_'+str(i+2),
               ''' grey title="bottom #%d: total integrand" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))

        # taper integrand
        Flow('full_Int_taper_bot_'+str(i+2),['full_Integrand_bot_'+str(i+2),'taper'],'add ${SOURCES[1]} mode=p scale=1,1')

        Result('full_Int_taper_bot_'+str(i+2),
               ''' grey title="bottom #%d: total integrand (w/ taper)" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))
        Plot('full_Int_taper_bot_'+str(i+2),
               ''' grey title="bottom #%d: total integrand (w/ taper)" pclip=99 grid=y 
                           labelrot=n wantaxis=y label1=%s unit1=%s label2=%s unit2=%s 
               ''' % (i+2,par['lt'],par['ut'],par['lx'],par['ux']))

        # get final contribution
        Flow('full_Contribution_bot_'+str(i+2),'full_Int_taper_bot_'+str(i+2),'stack axis=2')

        Result('full_Contribution_bot_'+str(i+2),
               ''' window min1=0 max1=1.0 | 
                           wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Bottom #%d" 
                           labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
               ''' % (i+2,par['lt'],par['ut']))
        Plot('full_Contribution_bot_'+str(i+2),
               ''' window min1=0 max1=1.0 | 
                           wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Bottom #%d" 
                           labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
               ''' % (i+2,par['lt'],par['ut']))

        Flow('full_Contribution_top_bot_'+str(i+2),['full_Contribution_top','full_Contribution_bot_'+str(i+2)],'cat ${SOURCES[1]} axis=2')

        Result('full_Contribution_top_bot_'+str(i+2),
               ''' window min1=0 max1=1.0 | 
                           wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Bottom #%d" 
                           labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
               ''' % (i+2,par['lt'],par['ut']))
        Plot('full_Contribution_top_bot_'+str(i+2),
               ''' window min1=0 max1=1.0 | 
                           wiggle pclip=100 poly=y screenht=10 screenratio=4 transp=y title="Bottom #%d" 
                           labelrot=n wantaxis=y label1=%s unit1=%s yreverse=y
               ''' % (i+2,par['lt'],par['ut']))

        Result('full_Cont_bot_'+str(i+2),['vph_bot_'+str(i+2),'full_Int_taper_bot_'+str(i+2),'full_Contribution_top_bot_'+str(i+2)],'SideBySideAniso')


# ------------------------------------------------------------
# ------------------------------------------------------------
#rules.test('vp','vs','ro','epsilon','delta','ss','rr',par)
# ------------------------------------------------------------
# ------------------------------------------------------------

End()

sfspike
sfadd
sfput
sfsmooth
sfgrey
sfmath
sfnoise
sfscale
sfrotate
sfrtoc
sffft3
sfreal
sfclip2
sfwindow
sfcat
sftransp
sfdd
sfgraph
sfpad
sfricker1
sfewefd2d
sfwiggle
sfcausint
sffft1
sfstack